NANO TECHNOLOGY INTERIOR SURFACE COATING
The lacquer coating, which is the last line on the liner inner coating, protects the surface of the pvc liner inner coating against harmful external factors such as pool chemicals and UV rays and extends the life of the coating. The nano composite surface does not hold dirt and does not stick to the pool floor and pool wall and is of great importance for cleaning the pool.
1.50 MM THICKNESS AND NETWORK EQUIPMENT SUPPORT IN LINER INTERIOR
Thanks to the 1.50 mm thickness in the liner internal coating, the internal structure of the pool provides high resistance to external mechanical impacts. It is not possible for the inner lining to tear or deform. It is not affected by hot and cold differences. Thanks to the polyester reinforcement inside the pool liner inner coating, it does not stretch, does not deform, and even if the pool remains empty, there is no wrinkle on the bottom of the pool.
Features
CHARACTERISTICS OF THE LINER COATING
Thanks to the antibacterial, lacquered, pvc-based liner, the formation of bacteria and micro-organisms in the pool is prevented. Because of its design, there are no grout or sharp corners in the pool and it does not occur in an area where existing bacteria will hold.
Due to both the materials used and the labor time, the high costs encountered in reinforced concrete pools can be suitable for every budget thanks to the prefabricated pools. In addition, both maintenance, repair and operating costs are much lower than reinforced concrete pools.
Precise sealing is ensured thanks to the anti fouling high strength liner. Liner coating is not affected by earthquakes thanks to its suspension type and high elongation coefficient, water leakage problems arising from sitting and collapses that may occur on the ground do not occur.
Thanks to its design, the prefabricated pools, which can be installed in a short period of 2 days, are made ready for use within 7 days when the time required for its infrastructure is taken into consideration.
Teklif İste